Bubbles in wood finishes is one of the most frequent questions we get emailed about here at The Woodwork Place. And it is a wood finishing problem that crops up every so often, regardless of what type of oil-based finish you’re using. From varnishes to polyurethane to oil finishes, air bubbles can sometimes get caught […]
Why Are There Bubbles In My Waterlox Finish? (And What You Can Do To Fix It) Read More »
We all know that wood finishing can sometimes turn out to be tricky, even at the best of times. Hours of work can become ruined when a finish turns out less than perfect. For example, lets say your shellac finish has turned out exactly as you imagined…except for one thing; it’s pockmarked by little tiny
Why Are There Bubbles In My Shellac Wood Finish? [+ How To Get Rid Of Them] Read More »
It’s not an uncommon wood finishing problem, but it can be the most annoying one to have to deal with. From polyurethane to shellac to oil finishes, all of them can sometimes fall foul of air bubbles marring their smooth final coat. Now usually, as long as varnish dries slowly, air bubbles should pop all
There Are Bubbles In My Varnish! How Do You Fix Bubbled Varnish? Read More »
It’s one of the most common problems with wood finishing. Little air bubbles can sometimes end up marring an otherwise smooth final top coat. And it’s an issue that can often crop up when applying Spar Urethane. Worse still, if those air bubbles still haven’t popped — long after Spar Urethane’s dried — then those
What’s With All These Bubbles In My Spar Urethane Finish?! [What You Need To Know] Read More »
It was all going so well. You took the painstaking time to apply every coat of polyurethane. And you made sure to lightly sand between each coat to get that really smooth final finish. But, now the final coat of polyurethane has dried and cured, things haven’t quite worked out the way you’d hoped. Instead
Can You Avoid Dried Air Bubbles Appearing In Your Polyurethane Finish? Read More »
There are only really a handful of wood types that work well as unfinished fretboard material. Why? Well, because fretboards are cut pretty thinly, so they need to be made from wood that’s fairly dense and hard. On top of that, if wood is to be left unfinished, it needs to be naturally durable and
Do Roasted Maple Guitar Necks Really Need A Finish? Read More »
Epoxy is one of the most water-resistant sealers you can use to safeguard wood from moisture and water-damage. Beyond that, it’s a fantastic glossy resin that enhance the look of tables and floors…plus it’s durable to boot. Still, despite it’s durability, unsealed epoxy can quickly start to lose it’s glossy sheen over time — so
Can You Go Ahead And Coat Polyurethane Over Tacky Epoxy? Read More »
Spar Urethane is one of the best ways to weatherproof exterior wood. Between its durability and its water-resistance, this wood sealer is popularly used on outdoor decking and garden furniture. So, if Spar Urethane is so durable, why wouldn’t you use it to seal over any shellac finish? Well, in this post, you’ll learn the
Can You Apply Spar Urethane Over Shellac (Or Will It Peel Off?) Read More »
Polycrylic is a fast-drying wood sealer that works wonderfully on interior wood. And a few coats of this durable finish can help prevent scratches and scrapes from marring the surface of wood. But, as a crystal clear finish, it doesn’t really add a lot in the way of color to pale wood grain. Yet, a
Can You Paint Over Polycrylic (All Without Sanding)? Read More »
A coat of varnish can give any wooden surface a fantastic glossy finish. Which is in stark contrast to Tung oils matte coat. But while varnish can give wood a glossy look, Tung oil is often better at preserving wood. So, is there a way to combine the two and coat varnish over Tung oil?
Can You Apply A Coat Of Varnish Over Tung Oil? Read More »
