Has this ever happened to you? You’ve decided to give that worn down furniture a bit of a touch up. And though you find a few cracks here and there, a dab of wood filler soon fixes those right up. And, to help rejuvenate its appearance, you figure wood stain is the best way to
What To Do When Staining Over Wood Filler Gives Blotchy Results Read More »
Finishing nails can be tricky little things to work with, and you will need more than just a good old fashioned hammer to nail these fasteners into place. That’s because the heads of these nails are much too small hammer them all the way home. You do that, and you are more likely to leave
Why Finishing Nails Keep Bending (And What You Can Do To Fix It) Read More »
Bench planes used to be a staple hand tool in most woodworking shops, that is until power tools usurped their place. The good old bench plane was used for shaping wood. But, nowadays, a half decent orbital sander can smooth down rough edges in next to no time at all. A bench plane is a
What Is A Bench Plane Used For? | A Classic Carpenters Hand Tool Read More »
OSB is one of the strongest types of manufactured woods you can use for construction. Based on its shear strength alone, it is comparatively stronger than MDF, Chipboard, and even Plywood. And that’s why it’s popularly used for roofing, wall sheathing, and attic floors. However, OSB is a rather plain looking material. Which is why
What Is The Best Type Of Paint For OSB Garage Walls? Read More »
Chipboard is cheap, easy to work with, and fairly durable. And those three reasons are why chipboard is used for budget-saving furniture. However, as a manufactured wood, chipboard is as far away from natural solid wood as you can get. Especially since some of the chemicals used to produce it are fairly dangerous in their
Is Chipboard Safe Enough For A Guinea Pigs Home? Read More »
Chipboard is a budget-saving substitute for natural timber. Which is why this manufactured wood’s often used to build flat-pack desks and cabinets. However, as an engineered material, chipboard is far from natural and chemical-free. Instead, this manufactured wood can contain some rather dangerous substances. So, in this post, we cover what really goes into the
Is Chipboard A Safe Alternative To Wood For A Rabbit’s Hutch? Read More »
Chipboard (also known as Particle Board) is an affordable alternative to using natural solid wood. Which is why this low-cost engineered wood is used to make budget-saving furniture, such as desks and cabinets. However, as the saying goes, you get what you pay for. And when a material is as cheap as chips(board), there’s usually
Is Chipboard Safe Enough To Use For A Hamsters Home? Read More »
A sturdy shelf needs to be made from sturdy stuff. Especially if it is going to be holding up hefty books or tool boxes. Nevertheless, although putting up some shelves is an easy DIY job, things can sometimes go wrong. Or to put it more succinctly, even a well fastened shelf can begin to sag,
Is MDF Board Good Enough For Making Strong Shelves? Read More »
MDF is a very affordable wood composite material. And, thanks to its affordability, this material is widely used for furniture, flooring, and even soundproofing walls. However, MDF is far less safe than solid untreated natural wood. Instead, made up of compressed wood fibers and glues, this material contains a lot of chemicals. But, if it
Is MDF Safe To Use For Your Hamsters Home? Read More »
MDF is a budget-friendly structural material used to make everything from cabinets to chairs. This manufactured wood — made up of compressed wood shavings — is even used for soundproofing. Now, once well-dried MDF boards have been sealed, they are safe to have inside the home. But, what does this mean for your rabbits safety?
Is MDF Safe Enough For A Rabbits Hutch? Read More »
